Article Directory – minolta-3d.com
Do you need info on a specific topic? – maybe it’s in here..

When most people think of Drywall, what comes to mind is usually basic information that’s not particularly interesting or beneficial. But there’s a lot more to Drywall than just the basics.

We have to admit the fact that we spend a lot of money in order to make the interior of our home beautiful. In fact, getting drywall installed alone can cost you hundreds of dollars not to mention the fact that you get it finished and textured, which will eventually make you spend more money. This is why water damage on drywall can be a very serious problem.

If you have a drywall that is water damaged, then there is a great chance that it happened because of leak from the pipes or also because of flooding. It can also be caused by leaks on your roof where rain water enters your home and eventually make its way to the drywall.

The good news is that drywall water damage is easy to repair. So, just how do you do it?

The first thing that you have to do is to determine where the leak is coming from. You have to remember that when fixing a water damaged drywall, you have to first fix the problem that caused it in the first place. In this case, you have to look for the source of the leak which caused the water damage on your drywall.

You have to keep in mind that nothing is more frustrating than getting the drywall fixed only to have the leak return and damage your newly fixed drywall again.

Now that we’ve covered those aspects of Drywall, let’s turn to some of the other factors that need to be considered.

Now that you fixed the leak, the next step is to cut a hole in to the wet drywall in order to begin air circulation. This can be done with the help of a strong fan and it is also highly recommended that you use a dehumidifier in order to reduce moisture content on the air inside the room where the water damaged drywall is located.

It is very important that you should monitor the drying process closely in order for you to make sure that the drying process is complete. By not completing the drying process properly, you will end up growing mold on the wall within 24 to 48 hours. If this happens, get a mold restoration professional to help in removing the mold. It is crucial that you should not touch the mold as touching it can only lead to the fast spreading of the mold around your home.

Now, after everything is already dry, you can now replace the drywall and any studs that were water damaged. You may need to get a plywood backer if you cut a large hole in order to secure the drywall you mount to cover the hole.

Nail in the patch of water resistant drywall to the backer board and place joint compound over the joints. Allow it to dry and then sand the joint compound for a smooth finish.

After that, you can now tape the joint with the drywall tape where the drywall comes together with the existing wall. Once the edges are smooth, it?s time for you to paint the area in order to match the color to the rest of the wall.

These are basically how you can fix a water damaged drywall. By following these tips, you will be able to repair water damaged drywall in your home and also do so with a professional looking finish.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Timothy Luke, feel free to visit his top ranked web host affiliate site for:webhost,web hosting, hosting, webhosting, reseller hosting, vps hosting, dedicated servers, dedicated hosting, website hosting[/webhostadvantage.com”>

Leave a Reply

You must be logged in to post a comment.





Search
Categories
Links: